Thanks for the replies! Since there is apparently no way to do it natively in DX4Win, I went to my next simplest idea. I exported from the DX4Win log to an ADIF file, then imported it into a new log in N1MM+. N1MM displays the counts as I wanted!
My PJ2ND log has ~91,000 QSOs (since 2017) and N1MM did not flinch! Not sure how that 420 MHz QSO got in there - clearly an error! 73, Jeff K8ND PJ2ND On Tue, 22 Apr 2025 20:09:01 -0400, <k2...@k2dbk.com> wrote: The only way that I can think of to do it entirely using DX4WIN is to do a filter for that specific band and mode then look at Filter->Count. This means you have to manually go through each possible combination of band/mode, which is going to be painful. Jim, AD1C, may have something easier up his sleeve. If you're good with Excel, you could open a logbook window that's been configured to include the band & mode, use "write to file" (which created a CSV file) then play around with it in Excel. What I did was to export the file from a logbook report, then manipulate it using Linux tools. The exact steps will depend on specifically what your logbook report looks like, but here's something to get your started if you are comfortable using the Linux command line: cut -f4,5 -d, temp.csv | sort | uniq -c | sort Here's what each piece does: 1) cut -f4,5 -d, temp.csv Extract only columns 4 & 5 from my CSV file which for me are the columns with band and mode. The -d, says that the file is comma delimited, and temp.csv is the name of my file. The "|" says to pass that to the next step; 2) Sort that output. This makes it so that everything is sorted such that all combinations of band,mode are next to each other. In other words, you'll have 20m, SSB all in a row, 15m,CW all together, etc. This is necessary for the next step; 3) Display a line consisting of the number of times each band,mode instance appears in the file. 4) Sort again which this time results in the results being displayed with the least frequent band/mode combination first and most frequent last. I can tell you that it took far less time to actually do that than to write this up. 😊 73, David, K2DBK -----Original Message----- From: dx4win-boun...@mailman.qth.net On Behalf Of jma...@k8nd.com Sent: Tuesday, April 22, 2025 7:02 PM To: DX4WIN@mailman.qth.net Subject: [Dx4win] Procedure? Count of QSOs by Band/mode? Is there a way to generate a list of the number of QSOs in the log for each band/mode? 73, Jeff K8ND PJ2ND ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
