No it's because the driver is not made for it This Delphi driver is for max 57600 not 115200.
To be honest all baudrate above 38400 is only needed If you are streaming the panadapter but for CAT its overkill Guy ON4AOI -----Original Message----- From: S. Steltzer <[email protected]> Sent: Tuesday, September 16, 2025 12:04 PM To: ON4AOI <[email protected]>; Tim moore <[email protected]> Cc: [email protected] Subject: Re: [Dx4win] Ver 9 updated radio files? Thank you Guy, And it is working at 115200. It's slow updating the frequency when you're tuning but I suspect that would be the same if I changed the radio( and my other programs ) to 57600. Thanks again to both of you, 73! Steve, WF3T On Tue, Sep 16, 2025, at 2:29 AM, ON4AOI wrote: > Here is the correct TS890S USB rig version attached > > For the record the maximum baudrate is 57600 because the driver in > DX4WIN Doesn't work correct above it , this is not only for Kenwood > but for all rigs. > > Guy ON4AOI > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
