Hello Tom, I'm sure they will help you configure your equipment with DX4WIN here. There are real experts I'll tell you how I have it. In Windows, enter device manager (COM and LPT ports) In my case I have Enhanced (COM 5) Standard (COM 7)
Then inside DX4WIN: File/Preferences/Radio Type (Check there that you have your radio selected) In Baudrate 38400 (It doesn't work for me with another value) And check that the COM port matches the one you have in Windows Device Management. Good luck. 73 EA8AM El sáb, 24 ene 2026 a las 6:49, Tom W4NBS via DX4WIN (< [email protected]>) escribió: > Greetings, > > Recently I picked up a YAESU FT-710 and I am trying to get it working with > DX4WIN. I’ve downloaded the drivers from the Yaesu website and in Device > Manager I see the two comports - one standard and one enhanced. > > But I can’t seem to find the answer to some of the other settings in the > PREFERENCE menu in DX4WIN. > > I would greatly appreciate if any one using this combination can shed some > light on how get the rig and program working together. > > Thanks! > > 73, Tom, W4NBS > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
