Joko kokeilitte sitä Fair-Rite 31-tyyppiä, jota täällä kehutaan:
http://www.audiosystemsgroup.com/RFI-Ham.pdf
New #31 Material is a Problem Solver The relatively new #31 material
made by Fair-Rite Products
is extremely useful, especially if some component of your problem is
below 5 MHz. Measured
data for the new material is displayed in Figs 18a and 18b. Compare it
with Figs 19a and 19b,
which are corresponding plots for the older #43 material. By
comparison, #31 provides nearly 7
dB greater choking impedance at 2 MHz, and at least 3 dB more on 80
meters. At 10 MHz and
above, the two materials are nearly equivalent, with #43 being about 1
dB better. If your goal is
suppression or a feedline choke (a so-called current balun), the #31
material is the best all round
performer to cover all HF bands, and is clearly the weapon of choice
at 5 MHz and below. Between
5 MHz and 20 MHz, #43 has a slight edge (about 1 dB), and above 20 MHz
they're equivalent.
We'll discuss baluns in detail in Chapter 6.
The new #31 material is useful because it exhibits both of the
resonances in our equivalent circuit
-- that is, the dimensional resonance of the core, and the resonance
of the choke with the lossy
permeability of the core material. Below 10 MHz, these two resonances
combine (in much the
manner of a stagger-tuned IF) to provide significantly greater
suppression bandwidth (roughly one
octave, or one additional harmonically related ham band). The result
is that a single choke on #31
can be made to provide very good suppression over about 8:1 frequency
span, as compared to 4:1
for #43. As we will learn later, #31 also has somewhat better
temperature characteristics at HF.
12.12.2011 13:53, Roland Sandberg kirjoitti:
Tämmöinen palaute tuli TJ:ltä Ruotsissa- tosi aktiivinen kuuntelija ja
ferriittitestaaja ( mutta kaveri on totta kai Pietarsaaresta kotoisin)
joka taas todistaa että 3H2 on tosi hyvä ferriitti..
"Stort tack för 3H2 ferriterna. Har gjort några korta tester med
Perseus S-meter. It´s a keeper! Jag jämförde med en stackad BN-73 och
kunde genast notera en något höjd signalstyrka, mest märkbar på det
lägre mw-bandet".
73'
RS
___________________________________________________________________________________
Tilaa WRTH 2011 nyt:
http://www.hard-core-dx.com/redirect2.php?id=wrth2011
-----------------------------------------------------------------
DX mailing list
[email protected]
http://montreal.kotalampi.com/mailman/listinfo/dx
_______________________________________________
THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at http://www.gnu.org/licenses/dsl.html
___________________________________________________________________________________
Tilaa WRTH 2011 nyt:
http://www.hard-core-dx.com/redirect2.php?id=wrth2011
-----------------------------------------------------------------
DX mailing list
[email protected]
http://montreal.kotalampi.com/mailman/listinfo/dx
_______________________________________________
THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at http://www.gnu.org/licenses/dsl.html
