Wes, Nice that you have manually pulled cards for CW and I guess you then found the Qs in your log and marked the select field in the DXCC box? When you run the award, assuming you checked the Exclude past submissions box and also checked the Select Marked Qs box, then DXbase would select your CW Qs but only if they are needed for the award you marked. You may already have other QSOs marked as submitted/credited in the Award field that satisfy the criteria of some of the cards you pulled manually. If that is the case, DXbase will not use a new QSO even if you have select marked. It only uses the ones that qualify.
Personally speaking, I would have run the DXCC award module, put a check in Mixed, a check in CW, a check in exclude past submissions, a check in Select marked Qs, and then let DXbase create the list of Qs that qualify, then pull those cards. Regards, Courtney ----- Original Message ----- From: "Wes (N7WS) and Linda" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, April 09, 2002 4:30 PM Subject: [DXBase] Help with selection wizard > I'm about to leave for Visalia and I thought I would take some QSLs along > for field checking. > > Since I have never submitted for a CW DXCC, I've culled through my cards > and came up with 120 (the limit for field checking). > > Printing a list for submission for these is no problem, however, many of > these could be added to my mixed total, so I'm trying to print a list of > Mixed new ones taken from these CW only cards. > > I have used the "Select for DXCC" option to force the selection of these CW > QSOs in preference to phone contacts when I have both. > > If I use the standard Award feature, Mixed Award and the "Select from full > log", I of course get both phone and CW "new ones." I want only the CW > new ones. > > I have tried too many combinations of wizard filters and additional > filtering on these selections in the Award creator to begin to list them. > > Any ideas? > > 73, Wes N7WS > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase
