You are right. With Windows2000 and DXB2003 with the telnet window open and connected to a cluster my cpu usage runs at under 1%. If I then send 'bye' to drop the telnet connection the cpu usage rises to 100% and stays there (at least for the 5 minutes I monitored it), until I close the telnet window. CPU usage then drops back to under 1%. It is the DXBase2003.exe task which shows the usage.
This is quite a surprise! Ron N5IN ----- Original Message ----- From: "Phil Duff" <[EMAIL PROTECTED]> To: <dxbase@mailman.qth.net> Sent: Thursday, June 20, 2002 10:22 AM Subject: [DXBase] Internet cluster window > I'm curious if any else has noticed this problem in DXB 2001 or later > versions... > > Open a Internet Cluster window and connect to a telnet DX Cluster - if the > telnet session with the DX Cluster is dropped the computer becomes bogged > down and the Win XP Task Manager shows CPU Usage at 100% with the > Dxb2001.exe image consuming 98-99% of the CPU. Closing the DXB Internet > window restores CPU Usage back to normal levels. > This only seems to occur when a DXB Internet cluster session is > dropped. With other telnet clients such as the standard XP telnet or > HyperTerm telnet clients the CPU Usage remains normal when a connection is > dropped. > > 73 Phil NA4M > > > -. .- ....- -- -. .- ....- -- -. .- ....- -- -. .- ....- -- -. .- > ....- -- > Phil Duff NA4M [EMAIL PROTECTED] Georgetown, Texas > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
