You must enter CE1 thru CE8 for Chile as CE alone is NOT a valid prefix because CE9 is Antarctica and CE0 is Easter Island.
73 de Tony, KD4K My Weather Page http://home.adelphia.net/~tonycash/ My Ham Radio Page http://home.adelphia.net/~tonycash/kd4k/radio.html Sawnee Mountain (WB4GQX 147.15 +.600) Repeater Page http://home.adelphia.net/~tonycash/sawnee/index.html ----- Original Message ----- From: "Ron Stordahl" <[EMAIL PROTECTED]> To: "DXBase" <[email protected]> Sent: Sunday, November 03, 2002 2:09 PM Subject: [DXBase] Needed functionallity in DXB2003 > I have just completed importing about 3500 Q's from an old DOS logging > program for a friend who just bought DXBase2003. That old program allowed > us to export comma delimited and through the use of BV7 > http://www.df3cb.com/bv/ I managed to create ADIF with a lot of hand editing > and import all of this to DXB2003. > > What I would like to be able to do now is to populate the State and Grid, > and while we are at it Name and Town, which are available from the RAC CD to > about 75% of these that are otherwise devoid of this information. > > I can't find any way, such as a function key which when a given record is > selected will cause this info to be looked up and populate the record if the > field to be populated is blank. It wouldn't have to be a gang replacement, > I would be willing to do it line by line. > > This would be a very useful function and a huge timesaver!! > > Ron N5IN > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
