First let's determine if you have internet access to any cluster via telnet:
At the lower left hand corner click Start, then Run. This will open a Run box. In that type C\command Now you will have a DOS box with a C:\> prompt. Type telnet dxspots.com and hit the enter key. This should open a Telnet window saying you are connected to N5IN at 204.21.76.52. Did you get this far? If you did, then we can take the next step, but let's see if you get this far first. Ron N5IN ----- Original Message ----- From: "Mail fromJim/Connie" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, November 03, 2002 11:13 PM Subject: [DXBase] Fw: Internet cluster > > > > I recently installed DXbase 2003 and used all the same settings as I had in > DXbase 2002 for the Internet Cluster (TOOLS, OPTIONS, USER OPTIONS, > INTERNET) > The Internet Cluster worked fine on DXbase 2002. > I can not get the same cluster site ( or any other site) to connect through > DXbase 2003. > I have no problem getting the site up and running when not using DXbase > 2003. > I can't getting any cluster sites to conect through DXbase 2003. > I have checked and re-checked my settings in the INTERNET site settings and > they are the same as my DXbase 2002 settings. > Any suggestions? > > Jim VA6JR > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
