Hi Bill, I do not see it read the freq from the rig in either case. Also, it depends on which column I'm in in the Cluster window. If I right click in the Type column, it sets the rig to the cluster freq. Any other column simply logs from the cluster info, like in the DX info window.
-Steve, AA3ZV ----- Original Message ----- From: "FireBrick" <[EMAIL PROTECTED]> To: "DXBase List" <[email protected]> Sent: Thursday, November 21, 2002 7:12 AM Subject: [DXBase] feature or anomaly > I think I've found a slight difference in how 'Log Current Entry' works from > the Cluster Window to the DX INFO Window. > > If a cluster spot comes that you wish to work and you tune the rig to that > frequency. > You may or may not be exactly the same as the Cluster frequency due to > slight errors or differences between rigs or cluster rounding. > > You work the station. > Now here is where the difference SEEMS to come in. > If from the Cluster right click menu I choose 'Log Current Entry' it logs > the entry but also changes the log AND the rig to reflect the cluster > frequency. > If from the DX INFO right click menu I choose 'Log Current Entry' it logs > the entry BUT enters the frequency from the rig and does not change the rig > to match the cluster spot frequency. > > This is a very minor issue but does come into play when the DX station has > drifted or qsy'ed slightly since the cluster spot came in. > > To me the difference between the two windows is a feature. > > Interested to see if other users have it work this way. > Running 2003, on a XP machine with a FT1000MP rig, fully interfaced. > > > ----------------------------------------------------- > How do I set my LaserPrinter to "Stun"?! > ----------------------------------------------------- > > Bill H. in Chicagoland > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
