Did you perhaps change the DX Spot Key entry in the TNC and/or Internet tab of user options. It must be
DX de ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, December 03, 2002 2:57 PM Subject: [DXBase] Logging & Frequency Control > Having been a DXBase user since the initial release of the first DOS version, > I finally decided yesterday to begin using all of the features of DXB 2002. > Previously DXBase was used only for logging, QSL'ing, and record maintenance. > I am having some problems and would appreciate some assistance. I am not a > technical IT person > so I would appreciate simple layman's explanations. > > Logging is no problem. When I enter a worked station in the log DXBase > tracks the ICOM 756PRO and records the proper frequency and mode. > > My problem relates to Internet spots. The Internet connection through DXBase > appears to be working properly and I have no difficulty receiving or sending > Internet spots. Mt difficulty comes when I try to click in the "type" box on > the left to log a Internet spot that I just worked. If I do a SH/DX the > result is displayed as follows: > > 14022.1 9L1AB > 21335.9 TR8CA etc. > > When the frequency is displayed in this format I have no problem controlling > the rig or logging the station. Also, when I click on the stations received > in this format the 'Previous QSO's" box is populated with the proper > information. > > My problem comes in when a routine Internet spot is received and it comes in > the following format: > > DX de W1AAA 14022.1 9L1AB > > When I try to log this Internet spot by either of the 3 ways, I either get A. > An error message that says "Field Cannot be Blank", or b. it logs whatever > station was last listed in the Previous QSO's box. > > Also, when I click in the Type box attempting to change the rig to the > frequency of the Internet spot nothing happens. > > No doubt whatever is causing the problem is my fault but I just cannot seem > to find the magic to make it function properly. Thank you for your > assistance. > > > Tom Neill K4XG > > > > --- StripMime Report -- processed MIME parts --- > multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML > or had an attachment. Attachments are not allowed. > Please post in Plain-Text only.--- > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
