This all has been triple checked already. Just won't run ... Happy 2003 Phil ON4VP
----- Original Message ----- From: "FireBrick" <[EMAIL PROTECTED]> To: "Phil ON4VP" <[EMAIL PROTECTED]>; <[email protected]> Sent: Tuesday, December 31, 2002 2:27 PM Subject: Re: [DXBase] cw keying - update > Phil > I bet you haven't checked the I/O address of the com port you selected for > cw keying. > Do that in Device Manager, ports, resources. > Then go to the Registry, Find the DriverX keys and make sure that the > address is the same as in the device manager. > > This info can be found in the Help File under CW. > > This is the MOST common cause for DXB unable to send cw but other programs > work properly. > DXB. > ----- Original Message ----- > From: "Phil ON4VP" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, December 30, 2002 11:13 PM > Subject: [DXBase] cw keying - update > > > Jack, > > I promised to get back with more info. > > I installed a fresh copy of DXBase 2003 on a W98SE machine. > PIII/1000MHZ - 521 MB RAM - KEYER COM 1 > > Keyer is a simple transistor that uses DTR to key rig. > > > Also on the fresh installed DXBase setting internal keyer to com1 this > function do not work. > I've tested the keyer, works great on f.e. MixW 206, N1MM logger, ... > > To be shure, I installed W98SE, than DXBase 2003, then tested, then after > having no results installed additional software so no 3th party drivers > where involved. > > So I think I've done everything by the book. > Since there's no way to set the pin number high (like RTS, DRT, etc...) in > the setup I'm not shure what is going wrong, but can't get this thing to > work. > > WHat I find strange is that the same small transistor based keyer function > well on other packages, and I don't think in W98 there are additional > drivers installed anyhow ... > > Best 73 > Phil ON4VP > > > > --- StripMime Report -- processed MIME parts --- > multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML > or had an attachment. Attachments are not allowed. > Please post in Plain-Text only.--- > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > > > > >
