Get ready for a little trial and error. I've tried to do this a ruler with meager success. But... Here's how. Tools, Design Labels, Choose your design. When the layout comes up on the screen. Go to Project, Page Setup.
You have to adjust the measurements that are the default for those WMPY cards. I had to adjust to my designed cards. What I did was right the measurement entered into the Layout on the card BEFORE attempting a print. With each adjustment, enter it under the first measurements. Saved me from wondering if I went in the wrong direction or not. hihi Don't forget, you have to save the new setting prior to printing. Been dere Done Dat and wondered why nothing changed. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, January 01, 2003 3:07 PM Subject: [DXBase] Printing On QSL Cards > I have no trouble printing labels at all. There is an option in the label > menu to print directly on the W4MPY QSL cards and forgo label printing. > > I was able to get the format set properly for all of the QSO data to fit the > W4MPY card but cannot get it to print properly. Someway I need to position > the print template farther over to the left as it is printing off the card. > There must be an easy fix but I do not seem to be able to find it. Any help > would be appreciated. Thanks. > > Tom Neill K4XG > Windy Hills Farm > 6500 Covington-Eudailey Road > College Grove, TN 37046 > Phone: 615-368-7311 > FAX: 615-368-7331 > CELL: 615-210-5617 > > > --- StripMime Report -- processed MIME parts --- > multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML > or had an attachment. Attachments are not allowed. > Please post in Plain-Text only.--- > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > >
