Make sure the Valid Column is checked as valid in both mixed and mode. Double check that the frequency puts it in the proper band segment also. That should only effect a ssb contact but maybe it was in the rtty band segment. You could have the mode set wrong. ----- Original Message ----- From: "David Robbins" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, March 21, 2003 5:55 PM Subject: [DXBase] Country not showing up confirmed
> I recently upgraded to DXbase 2003 from 2002 and I'm really enjoying the > changes. > > I received a stack of cards from the Buro today and was keying them into > the previous qso window. I was checking the summary window as I went along > to see if I needed the card for a new band country. I came to TS7N (3V) > and clicked on the confirm button to indicate the receipt of the card > (there were 6 qso's on the card). When I finished I noticed that all the > bands changed from W to C except for the 40M CW one. I checked everything > again. I had done everything right. > > So, I de-selected confirm and re-selected it again in hopes of clearing up > the problem. It did not work. I ran Initialize tables, but that did not > work either. > > I clicked on the 40M CW "W" on the summary window and it brings up the > previous QSO window and includes the TS7N qso and indicates that it is > confirmed. > > Any ideas on what is going on? > > > > --- StripMime Report -- processed MIME parts --- > multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML > or had an attachment. Attachments are not allowed. To learn how > to post in Plain-Text go to: http://www.expita.com/nomime.html --- > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > >
