All,

         I did it here on 2 gHz machine and abt 1 second. With sound on
it was a little slower because one of the spots was needed. Abt 20k
QSO's in log......

                                         Jim N8JV


At 04:28 PM 4/27/03 -0400, you wrote:
>Ron,
>
>I did it on a 500mhz machine and it processed in about 3 seconds.  I did it
>on a 3.5ghz and it was less than a second.  In both cases, sound was turned
>off.  I doubt it can be any faster than that!
>
>Jack
>
>----- Original Message -----
>From: "Ron Stordahl" <[EMAIL PROTECTED]>
>To: <[email protected]>
>Sent: Sunday, April 27, 2003 3:31 PM
>Subject: [DXBase] DXB2004 sluggish with SH/FDX/50?
>
>
> > I just noticed this.  Connected via telnet to an AR-Cluster (mine at
> > dxspots.com) when I type SH/DX/50 the list comes thru very quickly, but
> > when I type SH/FDX/50 (i..e. formated as if the spots had arrived
> > normally) DXB2004 is very sluggish.  What it is doing is looking at each
> > line and determining which I need and transfering them to the needed
> > spots window.  This does take a little additional time, this was noticed
> > in DXB2003, but now it seems to take a 'long' time.
> >
> > Connecting instead using a stand alone telnet client I can verify that
> > SH/FDX/50 is very quick, so its not a problem with AR-Cluster.
> >
> > Assuming you have a reasonable size log, so it has a lot of looking to
> > do, try doing a SH/FDX/50 and see what happens so I will know it's not
> > only at my system.
> >
> > Ron, N5IN
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
>
>
>_______________________________________________
>DXBase Reflector - Please visit us on the web at www.dxbase.com
>- - - - - - - - - - - - - - - - - - - - - - -
>To UNSUBSCRIBE please visit:
>http://mailman.qth.net/mailman/listinfo/dxbase

*****************************
Jim Vining  N8JV

[EMAIL PROTECTED]
[EMAIL PROTECTED]
*****************************

Reply via email to