Sherman, The entry is case sensitive:
Dxb24 LPT1 both in the Dxb2004.ini and also in the registry. The port address in the registry must be correct for your parallel port. After making any change to the registry, you must reboot your machine for the change to take effect. The driver utility makes it easy to set the registry without having to use regedit, but you must be sure you have the correct port address entered in the utility. Regards, Courtney ----- Original Message ----- From: "Sherman Banks" <[EMAIL PROTECTED]> To: "FireBrick" <[EMAIL PROTECTED]>; "DXBase List" <[email protected]> Sent: Tuesday, April 29, 2003 7:02 AM Subject: RE: [DXBase] Lost CW Functionality Workaround in DXB 2004 > I just checked the registry and the Port Count value is different. I > changed it to be the same as the entry for DXB98, changed the DXB2004.ini > back to DXB24 LPT2 and it does not work. The port base entries are > identical for DXB98 and DXB24 LPT 1 and 2. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of FireBrick > Sent: Monday, April 28, 2003 9:29 PM > To: Sherman Banks; DXBase List > Subject: Re: [DXBase] Lost CW Functionality Workaround in DXB 2004 > > > Sherm, > That's telling me that the DXB driver program did not work correctly. > In the registry, does Dxb24 lpt2 and Dxb98 lpt2 have the same I/O address. > I suspect the dxb24 one is incorrect. > > > ----- Original Message ----- > From: "Sherman Banks" <[EMAIL PROTECTED]> > To: "DXBase Reflector" <[email protected]> > Sent: Monday, April 28, 2003 7:45 PM > Subject: FW: [DXBase] Lost CW Functionality Workaround in DXB 2004 > > > > Sorry.. the file is called DXB2004.INI. I got confused with DXBase from > > those DOS days gone by... > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Sherman Banks > > Sent: Monday, April 28, 2003 8:40 PM > > To: DXBase Reflector > > Subject: [DXBase] Lost CW Functionality Workaround in DXB 2004 > > > > > > I had several people inquire about a solution to the DXBase 2004 inability > > to send CW on my LPT port. I was able to devise a workaround. I went > into > > the DXBASE.INI file and changed the line that reads > > > > DXBPORT=Dxb24 LPT2 > > > > to > > > > DXBPORT=Dxb98 LPT2 > > > > My CW now works with DXBase 2004. I know its not the best solution, but > at > > least it works! > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
