Hi Ray, what would you like to achive? Networking Access is 'not really = possible'. What I do here ... I have DXBase running on two machines at my QRL. Both are using the = same *.mdb on a network drive. Both machines are connected to the cluster = (one with DL6LAU, the other with DL6LAU-1). Machine 'A' has the radio, = rotor, ... connected. Machine 'B' at my 'normal working place' is used to see if I = need a QSO on a certain band. As soon as I see that there is something new, = I go to 'the radio room', work the station and log the station. This information is NOT updated until you close DXBase on 'the logging machine' 'B' and start DXBase again. But this is a limitation of = Access. Maybe this helps?
73sss Carsten, DL6LAU -----Urspr=FCngliche Nachricht----- Von: GM0VRP [mailto:[EMAIL PROTECTED] Gesendet: Mittwoch, 7. Mai 2003 20:02 An: Dxbase Reflector Betreff: [DXBase] Networking Hi All Is it possible to network Dxbase between two machines any help apreciated Rgds Ray GM0VRP --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- _______________________________________________ DXBase Reflector - Please visit us on the web at www.dxbase.com - - - - - - - - - - - - - - - - - - - - - - -=20 To UNSUBSCRIBE please visit: http://mailman.qth.net/mailman/listinfo/dxbase
