Looking for some help with this one. Installed dxb2004 a week back. Everything is running well except for radio control of my IC746. The radio is talking fine to dxb2004, the problem is when I go to log something it ALWAYS QSY's the radio to VFO A and puts that frequency in the log. Kind of a pain, if I'm tuned to VFO B or a memory channel. When I enter a callsign in the log and hit 'tab' the radio immediately QSY's to VFO A.
I thought it was a problem with the radio ini file so I swapped in the one from dxb2003. No change. As a test I swapped the 2004 radio.ini file to dxb2003 and it works normally there. Based on that I'm assuming the problem is not with the .ini file. I've been through the help files and the setup files, can't find anything I'm missing. It's like the 'reload radio' function is always active (the menu you get when you right click a log entry) but that seems to be a one time, not a toggle function and there is not check mark next to 'reload radio' when I bring up the menu. So, am I missing something (as usual) or is there a problem here? All other functions work fine. If I use the 'HF Frequency' button it sets the radio fine, even does split correctly. Everything works OK with dxb2003, but not in dxb2004. Any advice or help would be greatly appreciated. '73, Jim, KK1W
