Just tried VE7CC's AR-User. Now DXB does not mess up my other running programs with it's 100% CPU usage problem. Perhaps I will be able to use AR-User as a work around till Jack fixes DXB's Telnet problem. Thank you for the heads up on AR-User.
73 Bill WA4OYH -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jim McDonald Sent: Saturday, August 23, 2003 4:33 PM To: dxbase@mailman.qth.net Cc: Lee VE7CC Subject: Re: [DXBase] internet cluster window Ron, I haven't tried to start both programs simultaneously. I don't start or stop either program very often, so it's not a problem to single click both icons. I start VE7CC's program (http://ve7cc.net/), where I have the Telnet box in the Local Network section of the port setup window checked. I changed the Hosts file in DXbase for my preferred node (mine, of course!) to 127.0.0.1. So, after starting VE7CC's program, I click the box to connect. In DXbase, I just open the Internet Cluster window (I have a shortcut F-key to make it easy), which starts the spots flowing from VE7CC's AR-User program. I also use VE7CC to feed WriteLog, using the local IP address above in WL to connect to AR-User. I don't need multiple node connections that DX Telnet provides, and I can easily change the AR-Cluster parameters on the fly with AR-User, so the node doesn't send me more spots than I need. For a RTTY contest, I set the AR-Cluster filters to send only RTTY spots, for instance. Jim N7US ----- Original Message ----- From: "Ron Stordahl" <[EMAIL PROTECTED]> To: "Jim McDonald" <[EMAIL PROTECTED]>; <dxbase@mailman.qth.net> Sent: Saturday, August 23, 2003 8:26 AM Subject: Re: [DXBase] internet cluster window Have you found a way to automatically start VE7CC's AR-User when you start DXBase? This would be very convenient. AR-User could substitute for the telnet fault in DXBase as well as provide addiitonal features and the step of loading AR-User separately could be avoided. Ron, N5IN ----- Original Message ----- From: "Jim McDonald" <[EMAIL PROTECTED]> To: <dxbase@mailman.qth.net> Sent: Saturday, August 23, 2003 10:11 AM Subject: Re: [DXBase] internet cluster window > I am using VE7CC's AR-User program and feeding DXbase from that. (That's a > snap to do, BTW, and allows me to easily configure filters in AR-Cluster.) > I disconnected in AR-User from my node, thus terminating the telnet > connection. The CPU usage didn't increase. Is that the scenario? > > Jim McDonald, N7US > Mesa, Arizona > [EMAIL PROTECTED] > _______________________________________________ DXBase Reflector - Please visit us on the web at www.dxbase.com - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: http://mailman.qth.net/mailman/listinfo/dxbase
