Bill, I can't really answer for what you are seeing. But, I did test this here and see that it does work exactly as it should. After processing the print job, the software does ask if you want to update the QSL sent and if you answer yes, it does do it correctly in our test. There must be something you are overlooking but I'm not sure what it could be.
Regards Courtney ----- Original Message ----- From: "Bill" <[EMAIL PROTECTED]> To: "'Malcolm Rothwell'" <[EMAIL PROTECTED]>; <[email protected]> Sent: Saturday, October 11, 2003 11:05 AM Subject: RE: [DXBase] Populating the QSL Sent Column Thanks Mal, This will indeed populate the date field when you press the label button. This works fine for me when I am responding to a big pile from the bureau but... When I am operating and I work a station that I really want a card from I usually just hit the label button to store the label in the queue for printing later. Once every month or two I print these cards and send the out. In the past with DXBase 2002 and 2003, after printing out the labels a message would pop up and say, "Do you want to update the QSL date sent field in the QSO records for the labels just printed?" I would click yes and today's date would be placed in the QSL sent field. This would accurately reflect the date I sent the QSLs and not the date I worked the station. With my new 2004 version, I click yes and nothing happens. I was wondering if this was setting I have missed or if maybe this is broken? Bill, W5VX -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Malcolm Rothwell Sent: Saturday, October 11, 2003 7:43 AM To: Bill; [email protected] Subject: RE: [DXBase] Populating the QSL Sent Column Hello Bill, You need to check "Populate QSLS on Label Save" in the Tools/Options/Log Defaults. That should fix it 73's Mal G4KFT -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bill Sent: 11 October 2003 12:20 To: [email protected] Subject: [DXBase] Populating the QSL Sent Column After importing my log to DXB 2004, uneventfully, I decided to do my QSLing for the month. I had to do a little modifying to the label but that went ok too. I printed the labels and selected that I wanted DXBase to update the QSL sent column. The labels printed fine but no update of the QSL sent column. I have done this many times with DXB 2003 without a problem. I hope this is nothing more than cockpit problems on my part, but I didn't see anything in the help files. Bill, W5VX _______________________________________________ DXBase Reflector - Please visit us on the web at www.dxbase.com - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: http://mailman.qth.net/mailman/listinfo/dxbase _______________________________________________ DXBase Reflector - Please visit us on the web at www.dxbase.com - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: http://mailman.qth.net/mailman/listinfo/dxbase _______________________________________________ DXBase Reflector - Please visit us on the web at www.dxbase.com - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: http://mailman.qth.net/mailman/listinfo/dxbase
