Without seeing the adi file, I'm betting that you must use a word editor and change the adi field designation and size for that field in all records. Hope you didn't make 4K contacts. :-(((
Now if you do have Writelog, you may be able to import the adi file but you probably will have the same problem with the field names. ----- Original Message ----- From: "george" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, April 18, 2004 10:54 AM Subject: RE: [DXBase] converting to cabrillo file > > I can NOT get the generated serial numbers to export. Sorry for the error. > > George Nicholson N4GRN > ------------------------------------ > [EMAIL PROTECTED] > [EMAIL PROTECTED] > 7985 Spence Road > Fairburn, Georgia 30213 > tel: 770-969-8499 > tel2:404-386-3019 > fax: 770-969-8499 > mobile: 770-310-3585 > IM: [EMAIL PROTECTED] > www.nicholsoncontracting.com > ------------------------------------ > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of george > Sent: Sunday, April 18, 2004 11:46 AM > To: [email protected] > Subject: [DXBase] converting to cabrillo file > > > > I have decided to send my CQ WPX log in. > > I have converted the DxBase 2004 file to an "adif" file. I then convert to > "cab" file but I can get the serial numbers that were generated to carry > into the "cab" file. Also the "Special 1 filed" was used for the received > serial numbers and that will not export either. > > Any help would be appreciated. > > George N4GRN > [EMAIL PROTECTED] > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > >
