To all: I have made, for those who might want to use it, a Report that will "check" what your logbook's CQ and ITU Zones have in them - as compared to what the Refdata.mdb file says that they should be.
This Report has two options: (1) Check your "LoTW rcvd QSOs" - "Only entities with one CQ zone and one ITU Zone" (2) Check your "whole logbook" for "Only entities with one CQ zone and one ITU Zone" The Report is meant to be a Log Maintenance tool, and as such, I placed the ini file's entry in the Rptdesc.ini file - under the [User Designed Log Maint] folder. The Report shows an "incorrect" CQ or ITU Zone in RED color - and next to it shows what the "correct" CQ or ITU Zone should be in GREEN color. This Report would be for those users who might want to doublecheck their logbook - especially after importing their LoTW adif file - where the adif file had the "Include QSL detail:" entries in it. Again, this Report is meant to be a HELP to the user. For those who want this report (DXbase 2005 users only) - here is the LINK to the Report: ftp://ftp.qsl.net/pub/wa6axe/checkmyzones.zip PLEASE Note:: The ZIP file contains "both" the Report file itself ( checkmyzones.rpt ) -- plus the Rptdesc.ini file .. You will extract the checkmyzones.rpt file into your DXbase 2005 Reports folder -- and separately, you will extract the Rptdesc.ini file into your DXbase 2005 Main folder (letting it overwrite the existing Rptdesc.ini file). If you are unsure about this report and how to extract onto your computer - pse feel free to send me an email. 73 de Joe WA6AXE
