Repost after receiving no replies to first query... After having great success using the internal CW keyer feature in DXbase 2004/5, all of a sudden it refuses to work at all. My setup is radio 1 on com1 and radio 2 on com4 with the CW running on com1. When I upgraded to 2005, it worked after running the driver setup. Since the problem started, I have run the dxbdvr program 20 times or more and it still does not solve the problem. I have checked port addresses and amended com3's address to match the PCMIA modem that uses that port, just in case that was an issue. No joy. I have an RS232 analyzer in line and I'm sure that the software is not toggling the line. Also, I get a key down condition when the computer is booting up as the comport inits, so I know that I have connectivty and the keying circuit is working. So I'm left with an unexplained software driver glitch that is really starting to irritate. I retreated to the 2004 version and it too has the problem. I used N1MM logger over the weekend and its handling of the CW function was perfect. The only thing I have done to my computer recently that might affect ports is that I have a) added a wireless PCMIA card (which did not affect anything at the time I added it) and b) I pulled out the PCMIA modem for a couple of days and replaced it. I noticed the problem not long after that, but I'm not sure it was coincidental. Anybody got any bright ideas? Randy Galloway KN4QS
