Hi, Dave My WinKey works the same way. I thought this was normal operation. When I first turn on the computer, before loading the DXBase 2005 program, WinKey works from the paddles with the speed controlled by the speed pot. The DXBase program takes over speed control after that. If I close down DXBase, the WinKey is disabled and won't operate with paddle input until DXBase is reloaded (or until the computer is rebooted).
I don't regard this as objectionable, but was surprised to hear from you that another program operates differently. 73 de Chuck NI0C > Date: Fri, 3 Sep 2004 21:01:18 +0100 > From: "g3rxp" <[EMAIL PROTECTED]> > Subject: [Dxbase] Winkey > To: <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > Hi I have just obtained DXBase 2005, and set up the winkey option. Works fine with speed control from the top of the screen (using the mouse) but the speed pot on the winkey is disabled. > It works fine on N1MM. Any one have any ideas?.. is there a command to enable it?... > > Regards Dave >
