Everyone, A few years ago I did 3 labels for printing on card backs and sent them to Scientific Solutions. They are located at,
output/user designed labels/QSO Labels, 3, 6 or 9 per card/crdback3.lbl, crdback6.lbl or crdback9.lbl. There is an error on them. The word "Band" needs to be changed to "Freq". Most of the time this error does not matter because it is obvious what band or frequency was used. The problem is on 30 meters, it looks like the 10 meter band was used. So if you are using these three labels, make the change by using tools/design labels. Tom N4TL From [EMAIL PROTECTED] Tue Mar 15 13:18:08 2005 From: [EMAIL PROTECTED] (FireBrick) Date: Tue Mar 15 13:21:16 2005 Subject: [Dxbase] 7Q7MM mgr info References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> I use the DXBase Manager Database also. But I also use the little PF icon which takes me to the Pathfinder URL where most of the most recent up to date qsl manager info can be found. There is also the QRZ icon which can help also. With call changes and managers changes happening daily, you really have to check multiple sources to get a consensus. ----- Original Message ----- From: "Sanford Ardern" <[EMAIL PROTECTED]> To: "DXbase Reflector" <[email protected]> Sent: Tuesday, March 15, 2005 10:33 AM Subject: [Dxbase] 7Q7MM mgr info > Just a heads up on 7Q7MM manager info. I don't know if the mgr info was > already in > DXB2005 or I entered it. I sent direct for a 30 mtr QSO. I got the following > via email: > > Please send a QSL card to G3LQP for your qso on 29 April 2004. I was the QSL > manager > for a single op 7Q7MM, who left Malawi TEN YEARS AGO. > Thanks, > Rich N4RFN > > 73 Sandy W4DUP > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] >
