Here's what happens: Summary window works okay (when I click on a QSO in my
log I get correct country and band information), until I do the following: I'm
listening to a stateside station and I enter the callsign temporarily into my
QSO Log and use the DX callsign lookup to find out the state from my QRZ.com
files (stored on my hard drive). Once I do that (and scrub the temporary qso
entry), the summary window no longer works correctly-- i.e., when I then point
to an entry in my QSO log, I get USA and some state, no matter what country of
the QSO. Only way I can fix this is to exit DXBase and reload. I just tried
this on DXBase 2005 and I don't get this error.
Any help would be appreciated.
Thanks & 73,
Chuck NI0C
From [EMAIL PROTECTED] Sun Jul 24 19:46:19 2005
From: [EMAIL PROTECTED] (Joseph Glockner)
Date: Sun Jul 24 19:45:21 2005
Subject: [Dxbase] DXB2006-- error in summary window
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Chuck,
With my RAC, I have the SAME thing happen here too ... the only way
to "not have it happen" is to make sure that the "Auto Screen Lookups"
is checkmarked in the "Directories" TAB of the user options ...
SAME as you - the problem is "not" in DXbase2005.
Work-around for now appears to be to always use the "auto screen lookups".
73 Joe wa6axe
Chuck Guenther wrote:
> Here's what happens: Summary window works okay (when I click on a QSO in my
> log I get correct country and band information), until I do the following:
> I'm listening to a stateside station and I enter the callsign temporarily
> into my QSO Log and use the DX callsign lookup to find out the state from my
> QRZ.com files (stored on my hard drive). Once I do that (and scrub the
> temporary qso entry), the summary window no longer works correctly-- i.e.,
> when I then point to an entry in my QSO log, I get USA and some state, no
> matter what country of the QSO. Only way I can fix this is to exit DXBase
> and reload. I just tried this on DXBase 2005 and I don't get this error.
>
> Any help would be appreciated.
>
> Thanks & 73,
>
> Chuck NI0C
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
From [EMAIL PROTECTED] Mon Jul 25 08:39:47 2005
From: [EMAIL PROTECTED] ([EMAIL PROTECTED])
Date: Mon Jul 25 08:38:56 2005
Subject: [Dxbase] Omitting QSL's already sent in selection wizard
Message-ID: <[EMAIL PROTECTED]>
I'm using DXbase 2003. No matter how I set the QSL sent box I can't seem to
eliminate printing out labels where the "sent" box is already checked. What am
I doing wrong?
Thanks,
Steve
W2KN
