Ronald, From the HELP files - the following should be done to resolve your problem:
//quote// DxbPSK Performed Illegal Operation If you attempt to run the DxbPSK program and receive an error message before the program boots up that says DxbPSK attempted to perform an illegal operation, it probably means that the WinPSKX.DLL file did not get registered properly during our installation. You can register the file yourself by following these steps: Locate the file called regsvr32.exe that will be located in your Windows/System folder on Win95/98/ME. On NT and Win2000 it is located in your WinNT/System32 folder. Copy regsvr32.exe into your DXbase folder. Open a command box ( sometimes called a DOS box ) and using the standard MSDOS command for change directory, perform a CD to the full path of your DXbase folder. At the DOS prompt in your DXbase folder, type the following command: Regsvr32 WinPSKX.dll ( note there is one space between the 2 and the W ). You should see a message that indicates that the file was successfully registered. Now, you can try to run the DxbPSK program again. If you continue to have the same problem, then there is some other problem. Copyright ?1999 - 2004 Scientific Solutions, Inc. //unquote// 73 Joe wa6axe Ronald Ford wrote: > I'm having trouble getting DXbase DxbPSK program to run...I receive a > message"unsupported operation was attempted". I was able to use this > feature under the old release...can anyone assist??? I'm running DXbase > 2006 with Windows XP...thanks in advance... > > Ronald J. Ford > 129 Peach Orchard Drive > Benson, NC 27504 > 919-894-8707 > [EMAIL PROTECTED] > Amateur Radio Call W4RJF > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > From [EMAIL PROTECTED] Tue Jun 21 13:05:56 2005 From: [EMAIL PROTECTED] (Doug McDuff) Date: Tue Jun 21 13:07:19 2005 Subject: [Dxbase] PSK 31 Assistance In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> With XP, it is located in the following directory: C:\WINDOWS\system32 73, Doug W4OX At 07:56 AM 6/21/2005 -0500, Joseph Glockner wrote: >Ronald, > > From the HELP files - the following should be done to resolve your >problem: > > >//quote// > > >DxbPSK Performed Illegal Operation > >If you attempt to run the DxbPSK program and receive an error message >before the program boots up that says DxbPSK attempted to perform an >illegal operation, it probably means that the WinPSKX.DLL file did not get >registered properly during our installation. You can register the file >yourself by following these steps: > >Locate the file called regsvr32.exe that will be located in your >Windows/System folder on Win95/98/ME. On NT and Win2000 it is located in >your WinNT/System32 folder. Copy regsvr32.exe into your DXbase folder. > >Open a command box ( sometimes called a DOS box ) and using the standard >MSDOS command for change directory, perform a CD to the full path of your >DXbase folder. At the DOS prompt in your DXbase folder, type the >following command: > >Regsvr32 WinPSKX.dll ( note there is one space between the 2 and the W ). > >You should see a message that indicates that the file was successfully >registered. > >Now, you can try to run the DxbPSK program again. If you continue to have >the same problem, then there is some other problem. > >Copyright ?1999 - 2004 Scientific Solutions, Inc. > > >//unquote// > > >73 Joe wa6axe >Ronald Ford wrote: >>I'm having trouble getting DXbase DxbPSK program to run...I receive a >>message"unsupported operation was attempted". I was able to use this >>feature under the old release...can anyone assist??? I'm running DXbase >>2006 with Windows XP...thanks in advance... >>Ronald J. Ford >>129 Peach Orchard Drive >>Benson, NC 27504 >>919-894-8707 >>[EMAIL PROTECTED] >>Amateur Radio Call W4RJF >>______________________________________________________________ >>Dxbase mailing list >>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>Help: http://mailman.qth.net/mmfaq.htm >>Post: mailto:[email protected] >______________________________________________________________ >Dxbase mailing list >Home: http://mailman.qth.net/mailman/listinfo/dxbase >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected]
