Hi, Tom Be sure to read Help, HF Radio Interface, Modifying Radio ini file
Your Omni 6 address (selected by the menu of your radio) must match the address in the ini file for DXBase. 73, Chuck NI0C From [EMAIL PROTECTED] Thu Sep 8 13:35:07 2005 From: [EMAIL PROTECTED] (Joseph Pontek Sr) Date: Thu Sep 8 13:41:28 2005 Subject: [Dxbase] A newbie again and the FT857D problem Message-ID: <[EMAIL PROTECTED]> I finally switched to the Windows DXBase after using DXBase from way back in the DOS 1.6 version. I am just hoping my DirecWay satillite will work when we get back down to Belize this winter. I have hooked up my FT-57D to the com1 serial port and after going over the settings I have found so far to set, all I seem to get is my FT-857D goes to a "locked" condition. It does not read the VFOs or mode. Anybody else been through this? I did not see it in the archives I have gone through so far. I will, also, be using my FT-1000MP in Belize and a TS-930S with the PIEXX board here in Indiana. -- Best regards de V31Joe"Palooka" Joe & Bev Pontek, Sr. 26441 Devaney Road Arcadia, IN 46030-9532 USA 317-984-7388 or P.O. Box 280 Dangriga Stann Creek District Belize 501-520-7072 V31JP K8JP VP5/K8JP VP5JP K8JP/VA2 [EMAIL PROTECTED] http://mywebpage.netscape.com/v31jp/homepage.html
