Hi Bob, Jim, et al. I took a little time last night and played with my settings, Bob. As long as I had one of the DTR, RTS, or CTS checked, it interfaced with my FT857D. It only failed to communicate when all three were unchecked.
Jim, K8FT wrote: >Bob, > >I have a Mark V. Serial Port Interface settings are: > >DTR High is checked and RTS High & CTS are unchecked >COM1/4800/8/NONE/2 > >These settings have worked flawlessly for me for 3 years. Hope this helps. > >73, > >Jim, K8FT > > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >On Behalf Of Bob Main >Sent: Friday, September 09, 2005 6:20 PM >To: DXBase >Subject: [Dxbase] Radio Control > > I have a Yaesu Mark V and a Kenwood TS-870. I was wondering on the Radio-1 >and Radio-2 tabs do you have DTR High, RTS High or CTS picked for either of >these rigs? I vaguely remember messing with these items a few years ago and >noting a difference, or at least I think I saw a difference. So wondering >what you have. > >I just reinstalled DXBase 2006 hoping to fix my communication problems >between DXBase and the radios. For some reason a number of my personal >options were missing and I had to fill in a number of blanks, unfortunately >and hope I have them all. >Thanks and 73 >Bob >KB4CL >-- > > Best regards de V31Joe"Palooka" Joe & Bev Pontek, Sr. 26441 Devaney Road Arcadia, IN 46030-9532 USA 317-984-7388 or P.O. Box 280 Dangriga Stann Creek District Belize 501-520-7072 V31JP K8JP VP5/K8JP VP5JP K8JP/VA2 [EMAIL PROTECTED] http://mywebpage.netscape.com/v31jp/homepage.html
