I'm preparing to make my 2006 dxcc submission. I've got one anomaly I can't seem to figure out.
Each time I receive a qsl for a open band/mode slot, I mark it as confirmed and enter a code into the Special-1 field. C06-1 (Card 2006-first submission of this year) In the DXCC Award Submission window I select QSO LOG CARDS ONLY SELECT MARKED QSO RECORDS ONLY QSOs Special 1 (I enter my C06-1 code) After running the compute, the report correctly shows a TK/DL4FF for a 17 meter Phone But it misses a TK/F5CWU for a 17 meter rtty. If I go and remove the code from the TK/DL4FF qso and rerun the Awards Report with the same criterion, it then properly omits the 17 meter phone and now includes the TK/F5CWU 17 meter rtty. I have looked at the two qsos in the log repeatedly and see no reason that the TK/DL4FF Phone should preempt the TK/F5CWU 17 meter rtty. I even checked to see if the frequency is in the proper band segment for each mode. I do NOT have a previous qsl for either call in that band/mode. I have deleted both qso's, shut down properly, reopened and then re-entered both qso's making sure to enter correct band, mode, frequency info. I'm stumped, and obviously missing something obvious. Any suggestions? ----------------------------------------------------- The original point-and-click interface was a Smith & Wesson. ----------------------------------------------------- Bill H. in Chicagoland webcams at http://24.14.49.4:8080 weather at http://mywebpages.comcast.net/w9ol/WX/HH.htm
