Hi Tom, If I read your email correctly you mentioned the ICOM CI-V interface. Unfortunately there is no third-party software that supports that interface with two radios connected to it. You must have one serial interface for each radio you wish to control.
Having said that, you might wish to try the following: In Dxbase MENU > USER OPTION unselect 'Connect HF Radio 1 Serial Interface' for radio one and try selecting 'Connect HF Radio 2 Serial Interface' for radio two. Make sure you have the IC-775 selected, the default address is set in the radio and the baud rate, etc in the DXB set-up is matching the rig. Hint - DO NOT USE AUTO SETTINGS. In the radio menus make sure CI-V Transceiver is OFF. Don't forget to use the Rig toggle button on the DXB menu bar. This way you will at least able to prove radio two is indeed working. I run two Icom rigs myself and had to give up the ICOM CI-V interface and go with two rig control interfaces. Again Dxbase can not control more then one rig on one serial port. Good luck, Eric - VE3GSI -----Original Message----- From: [EMAIL PROTECTED] I have both radios connected through an ICOM CI-V box which is connected to the serial port. Tom K4XG
