Just to put my mind at ease, is anyone using the combo DXbase with a K1EL-Winkey and a USB/serial adaptor with N9ZLE cable on an Icom 706MKIIG?
73, Larry From [EMAIL PROTECTED] Fri Jan 27 09:16:00 2006 From: [EMAIL PROTECTED] (Bruce Burnette) Date: Fri Jan 27 09:22:58 2006 Subject: [Dxbase] Fw: Text File conversion Message-ID: <[EMAIL PROTECTED]> ----- Original Message ----- From: "Bruce Burnette" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, January 26, 2006 9:33 AM Subject: Text File conversion > Anyone know of a good Text to ASCII conversion program? > > 73 > Bruce, K5PX > [EMAIL PROTECTED] From [EMAIL PROTECTED] Sun Jan 29 23:23:55 2006 From: [EMAIL PROTECTED] (Bill Parry) Date: Sun Jan 29 23:30:45 2006 Subject: [Dxbase] CW or LSB? Message-ID: <[EMAIL PROTECTED]> Last night I got on and worked a few fellows in the 160 contest. I started at the bottom of the band and all was well. Soon I noticed that the last three contacts were logged as LSB instead of CW. I went through and fixed the mode of these contacts and worked another...it logged as LSB! I remembered that there was a bandmap setup and checked to see. Sure enough the bandmap is set up for cw up to 1850 and LSB for 1850 up. The stations I had worked were all above 1850. I fixed this and everything is fine. I'm curious, why is this set to override the mode from my transceiver (FT1000MP)? I can't think of any occasion that might occur when I would work someone on CW and yet have the logging program automatically change the mode to LSB. If I did not have my radio attached to my computer, I could understand. Just curious? Bill, W5VX
