At 1/29/2006 11:23 PM, you wrote: >Last night I got on and worked a few fellows in the 160 contest. I started >at the bottom of the band and all was well. Soon I noticed that the last >three contacts were logged as LSB instead of CW. I went through and fixed >the mode of these contacts and worked another...it logged as LSB! > >I remembered that there was a bandmap setup and checked to see. Sure enough >the bandmap is set up for cw up to 1850 and LSB for 1850 up. The stations I >had worked were all above 1850. I fixed this and everything is fine. > >I'm curious, why is this set to override the mode from my transceiver >(FT1000MP)?
Because you checked the box to do so.... TOOLS->USER OPTIONS Log Defaults: "Over ride [sic] mode with Band Plan" > I can't think of any occasion that might occur when I would work >someone on CW and yet have the logging program automatically change the mode >to LSB. If I did not have my radio attached to my computer, I could >understand. Just curious? > >Bill, W5VX > > >______________________________________________________________ >Dxbase mailing list >Home: http://mailman.qth.net/mailman/listinfo/dxbase >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected]
