Sorry Earl I 'thought' I mentioned that WinPSK will NOT DDE to DXBase. If you check DXBPsk 1 has a 'log it' button in lower right corner. WinPsk 2.23 does not obviously.
----- Original Message ----- From: "Earl" <[EMAIL PROTECTED]> To: "FireBrick" <[EMAIL PROTECTED]> Sent: Sunday, September 03, 2006 2:40 PM Subject: Re: [Dxbase] DsbPSK upgrade > Hi Bill, > > Thanks for the idea of replacing DxbPSK with WinPSk. I am using WinPSK 2.23 > and > everything works great, starting it from the Programs drop down. Even worked > 3XM6JR while I was setting things up. > > But I'll be damned if I can get it to log into DXbase. I think I have read > all > the help files but no where does it say how to direct WinPSK to DXbase. Under > the general 2 tab in WinPSK it has the path selection, but I still find no > way > to log it. > > Any help would be appreciated. I'm sure it's simple but I'm still stumped. > > Thanks, Earl N5ZM.. > ---------------------- > > FireBrick wrote: >> After years of trying to figure out why it wouldn't work....Joe clued me >> in. >> For some reason, the regsvr32.exe file, that registers the .dll was not >> installed and didn't work. >> >> So I fixed that, following Joe's steps (which were in the Help file, >> double duh) and I had DxbPSK version 1.0 working...for the first time. >> >> As the program had been upgraded, I downloaded the newer version to see >> if that would work also. >> I renamed the DxbPSK version 1.0 and then copied the new version of >> WinPSK 2.13 into the Dxb directory and renamed it to the DxbPSK.exe >> version. >> >> Sure enough, that now works and the title bar does indeed say WinPsk 2.13 >> but of course it doesn't have the log it button. >> >> >> ----------------------------------------------------- >> Life is like a simile. >> ----------------------------------------------------- >> >> Bill H. in Chicagoland >> webcams at http://24.14.49.4:8080 >> weather at http://hhweather.webhop.org >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> > > -- > Earl F. Smith - N5ZM > > PO Box 20065 > White Hall, AR 71612-0065 > From [EMAIL PROTECTED] Mon Sep 4 15:33:58 2006 From: [EMAIL PROTECTED] (VE3WEJ Gmail) Date: Mon Sep 4 15:35:21 2006 Subject: [Dxbase] use of slash zero in callsign Message-ID: <[EMAIL PROTECTED]> Just tried the 2006 version? of dxpsk 1.00 and the qrz tab in that program seems if the option of slash zero is selected, the qrz database comes up with an error, it drops the slash zero as if a zero never existed try w0tvi... direct entry seems to be ok, because the slash 0 has no slash through it but if you can select from the psk on air where you click on it. it puts the slash 0 and does not work with qrz.... Dave Garber ve3wej/ve3ie From [EMAIL PROTECTED] Mon Sep 4 17:07:33 2006 From: [EMAIL PROTECTED] (FireBrick) Date: Mon Sep 4 17:08:49 2006 Subject: [Dxbase] use of slash zero in callsign References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Hmmmm . Try this. I think there are 'two' places that determine a 'slashed zero'. I have in 'Screen Setup>Receive Font a Arial Slashed Zero, it's also available in Xmit Font. Each is a different color, Xmit being Green and Rcv being Red. There is also a option to select Slashed Zero in the Settings>General Setup. If you turn off the slashed zero in the Settings>General Setup and select Arial Slashed Zero or Andale Mono from the Receive and Transmit Fonts settings in Screen Setup, Then it seems to recognize the character as a zero. ----- Original Message ----- From: "VE3WEJ Gmail" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, September 04, 2006 2:33 PM Subject: [Dxbase] use of slash zero in callsign Just tried the 2006 version? of dxpsk 1.00 and the qrz tab in that program seems if the option of slash zero is selected, the qrz database comes up with an error, it drops the slash zero as if a zero never existed try w0tvi... direct entry seems to be ok, because the slash 0 has no slash through it but if you can select from the psk on air where you click on it. it puts the slash 0 and does not work with qrz.... Dave Garber ve3wej/ve3ie ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
