Icom radios all have a preset address for computer communication. Although the instructions for many of the radios are identical, you have to make sure that the radio address is correct. You can either program your radio to an address for another radio, that is, pick an IC756ProIII and program your radio to 0x7F or pick the appropriate radio from the list. I think maybe the 7400 is the same as the IC746pro.
At 9/27/2006 08:08 AM, [EMAIL PROTECTED] wrote: >Ciao to all, > >I need help for Dxbase2006 and Icom IC-7400. As suggested >from many Hams on newsgroup, I try to 'interface' both devices, but >nothing! This txcv it is not supported, so I try with 756ProIII, but >nothing.... I wish to say you that this probleme I have 'only' with >Dxbase2006, becouse with N1MM Conest Logger and many other stuff's it >is all ok, I can send CW, I can send directly spot on correct >frequency, I can change the band on txcv and see that the softwares >follow tha change (and vice versa)......and so on. What else I can do? >(without sell to the IC-7400 :-)))) ) >Thank you and sorry for my poor >english, > >73 de Gius IT9VDQ > > >______________________________________________________________ >Dxbase mailing list >Home: http://mailman.qth.net/mailman/listinfo/dxbase >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected]
