My rig is a ft1000mp. I operate rtty in fsk mode using the RTY button. I operate psk via the PKT button which is really sending out a audio signal in LSB.
I can now use the new add in mdd.exe and mmtty.exe and as I have the frequency turned off in mdd.exe, it logs mmtty station as rtty in DXBAse If I switch to Joe's new DXBPSK, my rig is now in PKT/LSB mode and qso's automatically are logged as DIGITAL/PSK31. ----- Original Message ----- From: "Peter Dougherty" <[EMAIL PROTECTED]> To: "DXBase List" <[email protected]> Sent: Thursday, November 09, 2006 16:16 Subject: [Dxbase] MMD/DX Base interface notes > Hi all, > > After trying MMD with MMTTY and DX Base, here are a couple of suggestions. IF > you have > frequency control interfaced to DX Base already, you must go into MMD, > Options, DX Base > and turn off sending frequency information to DX Base (i.e. check the > do-not-send > option). Otherwise it will send 14000.0 to DX Base (or whatever the default > band is in > MMTTY's setup) instead of the actual operating frequency. > > In DX Base, if you don't use anything OTHER than RTTY as a digital mode (no > PSK or > anything else), make your default PSK mode RTTY. This will populate the MODE > column with > RTTY when you use MMTTY. Otherwise, so far, I've found no other combination > of settings > that will allow an MMTTY QSO to show up as RTTY and a PSK-31 QSO to show up > as DIGITAL > in the MODE column. > > Since I don't operate any PSK or Olivia, etc, that's fine for me, but if > anybody has a > way to log PSK/etc as DIGITAL and MMTTY RTTY contacts as RTTY, I'd love to > know. > > > > Cheers, > > Peter, > W2IRT > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected]
