By Job I think he's got it. Thanks Bill. That worked. You must have that Help file memorized.
Thanks again. 73 Greg K4KO http://www.k4ko.net =================================== Tennessee QSO Party 1800z - 09 September 2007 http://www.tnqp.com =================================== . -----Original Message----- From: On Behalf Of FireBrick Sent: Wednesday, October 11, 2006 7:41 AM To: DXBase List Subject: [Dxbase] power levels If you are using the newer version, I "Think" you must also set the power levels also in the band maps. ----------------------------------------------------- Bills travel through the post at twice the speed of cheque ----------------------------------------------------- Bill H. in Chicagoland webcams at http://24.14.49.4:8080 weather at http://hhweather.webhop.org From [EMAIL PROTECTED] Wed Oct 11 10:03:35 2006 From: [EMAIL PROTECTED] (Rick Kourey (K4KL)) Date: Wed Oct 11 10:09:10 2006 Subject: [Dxbase] Wrong XMIT PWR posted to logged QSOs References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> I have been having this exact problem on my upgrade to DXBase 2007. The power level is shown as 100 watts in the log with every entry even though my default is set for 1,500 watts. It is frustrating and requires me to check it every time an entry is made. Is there a known solution to fix it. Rick Kourey (K4KL) Marvin -- Charlotte, NC [EMAIL PROTECTED] ----- Original Message ----- From: "Greg Tomerlin - K4KO" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, October 11, 2006 8:27 AM Subject: [Dxbase] Wrong XMIT PWR posted to logged QSOs > > Same here John. Regardless of my entry on > the Log Defaults page, 100 appears in the > PWR column... some of the time. It's got > a better memory than I do. > > > 73 Greg K4KO > > > =================================== > Tennessee QSO Party > 1800z - 09 September 2007 > http://www.tnqp.com > =================================== > > . > > -----Original Message----- > From: On Behalf Of John Farber > Sent: Wednesday, October 11, 2006 5:38 AM > To: [email protected] > Subject: [Dxbase] Wrong XMIT PWR posted to logged QSOs > > > Running DXB2007 and since upgrading my shack PC to it, my XMIT power > posts > to a logged QSO as 100 W instead if 1500 W which I set using TOOLS, USER > > OPTIONS, LOG DEFAULTS. The screwy thing is, I have DXB2007 also > installed on > my Dell notebook PC, and it works just fine! Any ideas? > Thanks, > John > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected]
