From [EMAIL PROTECTED] Wed Dec 13 13:42:31 2006 From: [EMAIL PROTECTED] ([EMAIL PROTECTED]) Date: Wed Dec 13 13:46:53 2006 Subject: [Dxbase] VU7 (redo) Message-ID: <[EMAIL PROTECTED]>
One of the few things I can do with DXBase, Hi. Here's how I do it. Go to the pull down menus:? Click: Tools, Database Access, Country Prefixes, at bottom click "call map" Then I right click on the top entry in the "call sign"? column,? then select "last record," then you can see an open box at bottom of the list. Enter the complete call sign of the station, tab to the prefix column and select the appropriate county prefix/country in the list.? You can click on another entry just to secure the entry but I think it's in there when you exit (X) the window. I hope I haven't left anything out. I'm using DXBase 2000 so I hope this is same for your version. I did this for each of the VU7 callsigns as I had an issue getting it to recognize the / calls as VU7. This may not be the best way to do it, but it works. 73, Art, K4YYL From [EMAIL PROTECTED] Wed Dec 13 17:16:54 2006 From: [EMAIL PROTECTED] (Sergei UX1UA) Date: Wed Dec 13 17:20:23 2006 Subject: [Dxbase] ft 2000 In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Yes, Ray, Thank you, it helped. I have changed menu 28 to a value of 100 in FT2000 and the pacing to a value of 15 in the section of FT2000 in radios.ini in DXB. It works fine now. Kind regards and 73! de Sergei UX1UA aka UV5U, EN1U [EMAIL PROTECTED] Logs and photos at www.qsl.net/ux1ua > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of [EMAIL PROTECTED] > Sent: Wednesday, 13 December, 2006 2:31 > To: [email protected] > Subject: [Dxbase] ft 2000 > > > the ini file works well with the ft 2000 you must set in > menu 28 in the > radio to a value of 100 and the pacing in the ft 2000 > radio ini in dxbase > root dir file to a value of 15 73 ray nr1r > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] >
