Mine works fine without the "+" in front of the numbers. But putting a "-" in front of them sure gives the wrong headings.
73, Tim - N3XX ----- Original Message ----- From: "Jim, K8FT" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, April 20, 2007 1:56 PM Subject: RE: [Dxbase] Indicated Antenna Heading > If you're N latitude & W longitude make sure you have a + in front of both > numbers. > > Jim, K8FT > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Martin Hankins > Sent: Thursday, April 19, 2007 5:17 PM > To: [email protected] > Subject: [Dxbase] Indicated Antenna Heading > > I have recently reinstalled DXBase 2007 and have rechecked several times > to > be sure I accurately placed my latitude and longitude in QTH LOCATION; > however, the correct heading for each country are reversed. That is Short > Path indicated is really Long Path and the indicated Long Path is really > the Short Path. What could possibly cause this? > > Any help would be greatly appreciated. > > Martin, W5HTY > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected]
