Joe thanks a BUNCH for all the help. It is much appreciated.
At 08:12 PM 5/21/2007, Joseph Glockner wrote: >To all: > >I wanted to let you know that I had a DATE correction that >I needed to make to my original email (step-by-step instructions).. >I had the start date as July 15th - when it was supposed to be >May 15th.. > >I am also going to update the GIF photo at my website at: > >www.navycthistory.com/wa6axe/4O_changes.gif > > >So here is the latest version of the instructions -- > >---------------------------------------------------------------- > >1. VERY IMPORTANT --- First, Back-up your Logbook mdb file and >Refdata.mdb file to a safe place. > >2. Go to DXbase Main Menu - Tools/ Database Access/ Country Prefixes. >In the Primary prefix TAB of the Prefix Database ADD at the very >bottom of that table, a Temporary entry of : > >4O >Montenegro >+42.27 >-19.28 >"Deleted" : No checkmark >"Field Check" : Checkmark >"Bureau" : Checkmark >15 >28 >516 >EU >+0100 > >** NOTE: the DXCC # of 516 will be changed later on back-to it's >proper # of 514. > > >3. Close out the Prefix Database window - so that the entry we just >made can be >saved completely and that you will be able to see it when you go to step 4. > >4. Open back up the Prefix Database. > >** NOTE: In the Alias Map TAB, there are only 2 sets of columns for >the OLD1 and OLD2 > information. Since we will be adding some new info to > this Tab, the > "oldest" info (in OLD2 columns) will simply have to > "drop-out" of the Table. > >5. In the Alias Map TAB MODIFY the existing YZ3 and YZ6 Prefix >entries to read as follows: > >YZ3 YU 4O 20070515 YU 20060627 >YZ6 YU 4O 20070515 YU 20060627 > >NOTE: we will leave the YZ prefixes under YU (for now) - until the >ITU issues the YZ prefix(es) to >another entity. Past owners of the YZ prefixes need to still be shown. > >6. In the Alias Map TAB, MODIFY the existing 4N3 and 4N6 Prefix >entries to read as follows: > >4N3 YU 4O 20070515 YU 20060627 >4N6 YU 4O 20070515 YU 20060627 > >NOTE: we will leave the 4N prefixes under YU (for now) - until the >ITU issues the 4N prefix(es) to >another entity. Past owners of the 4N prefixes need to be shown. > >7. In the Alias Map TAB, MODIFY the existing 4O, 4O3, 4O4, and 4O6 >Prefix entries to read as follows: > >4O 4O >4O3 4O YU 20060627 >4O4 4O YU 20070515 T9 19921019 >4O6 4O YU 20060627 > >8. In the Alias Map TAB, MODIFY the existing YT3 and YT6 Prefix >entries to read as follows: > >YT3 YU 4O 20070515 YU 20060627 >YT6 YU 4O 20070515 YU 20060627 > >9. In the Alias Map TAB, MODIFY the existing YU3 and YU6 Prefix >entries to read as follows: > >YU3 YU 4O 20070515 YU 20060627 >YU6 YU 4O 20070515 YU 20060627 > > >10. Go to the Call Map TAB -- do a search of the Prefix column for any >YU6 entries that might be in that column.. Change each of them (if >you have found any) from YU6 to 4O. > > >11. **** FINALLY **** - go back to the Primary Prefix TAB and go to >the YU6 entry. >DELETE that YU6 entry completely. Then go to the 4O entry and change >the DXCC # of 516 -- to read as 514 ... > > >Close out the Prefix Database window completely. > > >Go to the Previous QSO window and FIND the YU6 prefix QSO's you might >have in your logbook .... when you have found them, simply change the >Prefix column from YU6 to read 4O .... > > >You are now done... > > > >----------------------------------------- >______________________________________________________________ >Dxbase mailing list >Home: http://mailman.qth.net/mailman/listinfo/dxbase >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected]
