I believe the Avery 8160 and Avery 5160 are one and the same.
----- Original Message ----- From: "K0BX" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, October 23, 2007 7:34 PM Subject: [Dxbase] SWL Label for Avery 5160 Stock Help >I got a bunch of SWL cards from the buro. I have not received any for a > long time. > > I want to QSL them and have entered them into DXBASE. > > But now I need a label file. I use Avery 5160 3 across label stock. I > did not see any like that in DXBASE2007. > I thought a while back someone has posted on? Maybe Joe? > > Any help? > > Joe K0BX > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] From [EMAIL PROTECTED] Fri Oct 26 00:25:28 2007 From: [EMAIL PROTECTED] (Joseph Glockner) Date: Fri Oct 26 00:32:41 2007 Subject: [Dxbase] Need Help on TS-850S Radios.ini file - Joe WA6AXE Message-ID: <[EMAIL PROTECTED]> To all: After "finally" getting a "level converter" for the Radio-Computer, so that DXbase2007 can control the Radio, ALL is working excellent -- EXCEPT -- for the SPOTS that have the QSX (freq) in the remarks section of the SPOT.. The Radio DOES ALL of the "freq" setups correctly and VFOA is set for the proper MODE --- BUT, (here is the glitch), the MODE for VFOB is "always" set as USB ??? I have played with the Radios.ini file for the TS-850 -- and can not for the life of me, get the MODE for the VFOB to setup "correctly".. Has anyone with a Kenwood - been able to HAVE a spot with a SPLIT QSX (freq) in it setup the Split MODE (VFOB) properly? 73 Joe wa6axa From [EMAIL PROTECTED] Fri Oct 26 00:56:06 2007 From: [EMAIL PROTECTED] (Joseph Glockner) Date: Fri Oct 26 01:03:31 2007 Subject: [Dxbase] Follow-up to my last email about Radios.ini file -- Joe WA6AXE Message-ID: <[EMAIL PROTECTED]> To all: The MODE for VFOB (when split) is "always" the MODE that I manually put it in - before clicking-on the SPOT that has the QSX (freq) in it ... I just manually made the MODE for VFOB as CW vice USB .. Then - clicked-on a SPOT with the QSX (freq) in it -- and the MODE for VFOB "stayed" at CW -- vice being setup as LSB - which would be correct for the frequency. 73 Joe wa6axe
