My elecraft K3 arrived yesterday, I finished building it today. It's a
fine radio indeed.
here is a radios.ini entry for it (based on the K2 one for now) Let me
know about things that are broken please
To use find the radios.ini file in your dxbase folder. make a copy of it
some place safe
Open it in notepad and paste the section between the --- Cut here --- s
73
Brendan EI6IZ
---- Cut here ---
[ELECRAFT_K3]
#Elecraft K3 revision 0.1 by Brendan Minish [EMAIL PROTECTED]
P_LSB=1
P_USB=2
P_CW_USB=0
P_CW_LSB=0
P_AM=5
P_FM=4
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=6
P_RTTY=6
P_PACKET=9
P_CWR=3
LSB=1
USB=2
CW=3
FM=4
AM=5
FSK=6
RTTY=6
CWR=7
HIGH=3
MEDIUM=2
LOW=1
OFF=0
ON=1
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
PACING=1
DefaultCW=3
DefaultAM=5
DefaultFSK=6
DefaultRTTY=6
DefaultFM=4
DefaultCWR=3
SelectVFOA= eoc(0)
SetVFOA=asc( "FR0;" ) asc( "FA" ) dec( %vfoa,11 ) asc( ";" ) asc("MD") dec(
%mode,1) asc ( ";" ) eoc(0)
GetVFOA= asc("FA;") rrs(14) eoc(0)
PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0)
SelectVFOB= eoc(0)
SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0)
GetVFOB= asc("FB;") rrs(14) eoc(0)
PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0)
SetMode= eoc(0)
GetMode= asc( "IF;" ) rrs(38) eoc(0)
PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";") eoc(0)
SetFilter= asc("K22;") asc( "FW0000" ) dec( %filter, 1 ) asc ( ";" ) eoc(0)
GetFilter= asc("K22;") asc( "FW;" ) eoc(0)
PrsFilter= asc("FW") dec(%dummy,4) dec( %filter, 1 ) asc ( ";" ) eoc(0)
SetSplit= asc( "FT" ) dec( %split ) asc ( ";" ) eoc(0)
GetSplit= asc( "IF;" ) rrs(38) eoc(0)
PrsSplit= asc("IF") dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(";") eoc(0)
--- Cut Here ---
--
Don?t complain. Nobody will understand. Or care. And certainly don?t try
to fix the situation yourself. It?s dangerous. Leave it to a highly
untrained, unqualified, expendable professional.
