I just down loaded LoTW into my data base. I have two call that I use. My old call, KE4MIL, and my current call K4MIL.
In the import utility, I used the KE4 download I used KE4 as the default operator and in the K4 download, I used K4 as the default operator. I load both download into the combined log of K4MIL. I initiated the tables and found that I only showed 108 confirmed vice 207 in LoTW. I know I did something incorrect, but don't know what to do to correct it. Thanks in advance for the help. 73 Stu K4MIL From [EMAIL PROTECTED] Wed Feb 27 19:03:33 2008 From: [EMAIL PROTECTED] (Joseph Glockner) Date: Wed Feb 27 19:07:25 2008 Subject: [Dxbase] LoTW inport In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Stu, IF you have BOTH of your callsigns listed in your REG file from Jack ???? Then -- in the Non-DXB Import utility window -- in the QSOs for these OPR Calls -- MAKE SURE that BOTH of your callsigns are listed/added then in the area where you have the words: Default Opr Call if not in source data - you can put K4MIL ... It sounds like - (to me) - that you are doing the imports "separately" -- if this is the case -- then just make sure that you have the callsign you are importing in BOTH places in the import window ... PSE be sure and doublecheck whether you have BOTH of those callsigns in your Registration file /.... 73 Joe wa6axe Stuart Spatz wrote: > I just down loaded LoTW into my data base. I have two call that I use. My > old call, KE4MIL, and my current call K4MIL. > > In the import utility, I used the KE4 download I used KE4 as the default > operator and in the K4 download, I used K4 as the default operator. I load > both download into the combined log of K4MIL. > > I initiated the tables and found that I only showed 108 confirmed vice 207 > in LoTW. > I know I did something incorrect, but don't know what to do to correct it. > > Thanks in advance for the help. > > 73 > Stu > K4MIL > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > > From [EMAIL PROTECTED] Wed Feb 27 19:31:24 2008 From: [EMAIL PROTECTED] (Joseph Glockner) Date: Wed Feb 27 19:35:19 2008 Subject: [Dxbase] Adding E7 prefix manually to DXbase -- Joe WA6AXE Message-ID: <[EMAIL PROTECTED]> Go to: Main Menu / Tools / Database Access / Country Prefixes In the Primary TAB : go to the very bottom of the list and ENTER in the column: Prefix: E7 Country: Bosnia-Hercegovina LAT: +43.52 LON: -18.26 Deleted: NO Checkmark Field Check: Checkmark it Bureau: Checkmark it CQ: 15 ITU: 28 ARRL-ID: 999 Continent: EU Click-on the entry right above that new entry - then "X" out of the window completely ... Come right-back-into the Prefix Database (as noted above) -- and this time go to the Call Map TAB -- In the Prefix column right-click that column - and in the MENU select "Find" Enter T9 in the textbox -- click Find next -- More than likely NO ENTRY will be found -- if a T9 Prefix "is found" simply change it to E7.. Continue with the SEARCH to find next ... until there are no more T9 prefixes found ... clear out of the FIND small window .. Now - click-on the Alias Map TAB ... right-click-on the Pri PFX column - Select Find ... Enter T9 in the textbox and press on Find Next ... change the "found" T9 Pri PFX entry to E7 .. press Find Next -- do the same thing when you "find" another T9 (change it to E7) -- continue this process until all Pri PFX T9 are FOUND and CHANGED to E7 .. Now -staying in the Alias Map TAB -- go to the TOP of the listing -- right-click-on the Old1 PFX column - select the FIND again -- you will now SEARCH the Old1 PFX column for any T9 entries -- when found -- change the T9 to E7 ... Now - staying in the Alias Map TAB ... go to the VERY BOTTOM of that list -- and ENTER/ADD: Map PFX: E7 Pri PFX: E7 When you finish entering the above - click-on the entry right above the new addition - Now - go back to the Primary TAB -- and DELETE the T9 Prefix entry in it's entirety ... then go back up and find your E7 entry in the Primary TAB (Prefix column) go to the ARRL-ID column and change that 999 that we entered to read 501 as always - to save the new entry - click-on the entry right above the modified entry -- Now - you are done in the Country Prefix Tables --- GO TO your logbook QSO window -- and CHANGE "ALL" of your Bosnia-Hercegovina QSOs (that being either a T9 callsign or an E7 callsign) in the Prefix column of the QSO logbook to read E7 ... You are done ... Reinitialize Tables ..... 73 Joe wa6axe
