Check under Tools/Options/User Options.. On the Log Defaults tab check to make sure the option to Load Band/Mode from HF Transceiver is checked. On the Radio 1 tab check to make sure you have the correct Comport identified as well as the Baudrate, Word Length, Parity and Stop Bits. Mine is COM2, 19200, 8, NONE and 2. Also make sure you have checked the boxes for Connect HF Radio 1 Serial Interface and DTR High. That is all there is to set in DXB itself. You don't say what you are using to make the connection to the radio, but by chance do you have the Icom CT-17 Level Converter? The DC power to my CT-17 comes from a switched connection on my power distribution strip. If I forget to turn it on when I start up DXB the frequency and mode don't populate until the dummy-in-charge flips the switch!
73, Gary AL9A ----- Original Message ----- From: "Dennis Hall" <[EMAIL PROTECTED]> To: <[email protected]> Sent: April 19, 2008 12:36 PM Subject: [Dxbase] Unable to populate frequency field >I am unable to populate the frequency field from the radio. > I am using an Icom 746PRO and the program appears to recognize > the radio, I can click on a spot and the frequency will set. > All the settings appear to be correct. Ideas? > > Dennis - KK7X > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected]
