Changing the baud rate to 19200 in the 746p and DXB cured the problem. Settings are 19200, none, 8, 1, RTS high. Also address is 66h in the 746p. Many thanks to all. JV -------Original Message------- From: JV Date: 6/13/2008 8:32:42 AM To: Z DX Base Subject: Re: [Dxbase] IC-746pro Hi Greg If I can find the problem, I'll post it. I have the baud rate set for auto and the address is 66h. Will probably be Monday before I play with this
problem agn. DXBase is the only program where there is a problem with the IC-746p. Also, the IC-7000 and IC-756p work FB. JV -------Original Message------- From: Greg - N4CC Date: 6/13/2008 6:45:12 AM To: [EMAIL PROTECTED]; JV Cc: [email protected] Subject: Re: [Dxbase] IC-746pro A friend of mine just bought a 746 Pro and he is having trouble getting it to respond to DXBase 2007. I downloaded the manual from the Icom site and see that the you can set the address by going to the set-mode...item 36 sets baud rate and 37 is the address. My friend's radio was set to 66h which appears to be what is in the .ini file. If you get an answer, I hope you'll post it to the reflector... Thanks and 73 de Greg-N4CC At 08:10 AM 6/12/2008, Chris Poulson wrote: >Hi, > >Not 100% sure of the exact details but you need to find which >address your ICOM is set to in the Menus, then you will need to edit >the section in Radios.ini that relates to your radio and change the >address to the same as the radio. I don't have an Icom anymore so >this is from my poor memory :-) > > > >On Mon, 9 Jun 2008 19:03:38 -0400 (Eastern Daylight Time), you wrote: > > > Need a little help. Any one have an IC-746pro running with DXBase2005. > >For some reason I can't get the computer to talk with the IC-746pro. Radios > >ini is installed and I think I have Options/Radio 1 set up for IC-746pro. > >Got to be some thing simple that I'm over looking. Maybe in the polling??? > >What are you guys using in Radios.ini or in the setup? > > > > The interface is working OK with my contest program N1MM Logger. > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
