Has anyone had any luck interfacing both the K3 and MMTTY in FSK with Dxbase 2007 at the same time? I can have Dxbase 2007 talk fine with the k3 or I can have MMTTY in FSK mode talk fine to the K3. But not both at the same time. I tried using N8LP LP-Bridge. I can get the K3 and MMTTY working fine together and it almost seems like DXBase 2007 is tied in. But the Dxbase won't control the K3.
I can get the K3 with MMTTY in FSK mode and N1MM all working fine together. I have the Com ports doing the following: COM 1 - goes to the ACC jack on the K3 for FSK keying COM 2 - K3 COM 11 (virtual port on LP-Bridge) - MMTTY COM13 (virtual port on LP-Bridge - Dxbase If I use AFSK I can get the K3, MMTTY and Dxbase work together since then MMTTY doesn't need RADIO COMMAND set up to the rig. It is using the audio card. But if possible I would prefer FSK. Am I missing something? Tnx N2TK, Tony
______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
