Are you using a native comport or is it a USB to serial adapter? If it is an adapter, have you recently unplugged it and plugged it Into a different USB port? If you have then the comport number most Likely changed and you would need to go to control panel and then to Device manager where you can check the comports and see which port the USB to serial adapter is assigned to. If you are using a native comport then I don't have any clue what the problem Might be. Good luck
73 de Tony, KD4K -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bob LaCursia Sent: Sunday, August 30, 2009 1:35 PM To: [email protected] Subject: [Dxbase] Comport Problem I've been using DXbase 2006 and have had no problems with comports until recently. Com2 was working just fine, but now if I try to use it I get an error msg stating: "Unable to open <HF Radio 1 comport>. This feature will be turned off." With Com2, I was able to control changing frequencies on my Kenwood TS-2000 with my mouse. If I change to another Comport that is accepted w/o an error msg I cannot control changing frequencies w/my mouse. I've read and re-read the documentation but nothing seems to resolve this problem. Any suggestions? Thank you in advance! Bob / K9SKY ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
