On Sat, 2009-10-03 at 07:29 +0200, Fred Handscombe wrote: > Hello Guys > > Is there a change I can make to radios.ini, or elsewhere, so that when I > click a spot DXBase to send the K3 to the DX > frequency but it uses CW REV? Currently it uses CW even if the radio was > already in CW REV.
Sure. the software sets the mode based on the value it has for that mode in the radios.ini file If you add the attached file onto the end of your radios.ini file (back it up first and remove the k3 entry if you already have it in there) you will have 2 entries for the k3 K3 and K3R K3R should do what you want K3 uses CW instead of CW Rev let me know if it's not working as expected -- 73 Brendan EI6IZ
[ELECRAFT_K3] #Elecraft K2 revision 0.2 by Brendan Minish [email protected] P_LSB=1 P_USB=2 P_CW_USB=0 P_CW_LSB=0 P_AM=5 P_FM=4 P_FM_N=0 P_DATA_LSB=0 P_DATA_USB=0 P_DATA_FM=0 P_CW=3 P_FSK=6 P_RTTY=6 P_PACKET=9 P_CWR=3 LSB=1 USB=2 CW=3 FM=4 AM=5 FSK=6 RTTY=6 CWR=7 HIGH=3 MEDIUM=2 LOW=1 OFF=0 ON=1 FREQDIVIN=1 FREQDIVOUT=1 USEEXTENDEDMODES=0 FREQSHIFT=0 PACING=0 DefaultCW=3 DefaultAM=5 DefaultFSK=6 DefaultRTTY=6 DefaultFM=4 DefaultCWR=3 SelectVFOA= eoc(0) SetVFOA=asc( "FR0;" ) asc( "FA" ) dec( %vfoa,11 ) asc( ";" ) asc("MD") dec( %mode,1) asc ( ";" ) eoc(0) GetVFOA= asc("FA;") rrs(14) eoc(0) PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0) SelectVFOB= eoc(0) SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0) GetVFOB= asc("FB;") rrs(14) eoc(0) PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0) SetMode= eoc(0) GetMode= asc( "IF;" ) rrs(38) eoc(0) PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";") eoc(0) SetFilter= eoc(0) GetFilter= asc("K31;") asc( "FW;" ) eoc(0) PrsFilter= asc("FW") dec(%dummy,4) dec( %filter, 1 ) asc ( ";" ) eoc(0) SetSplit= asc( "FT" ) dec( %split ) asc ( ";" ) eoc(0) GetSplit= asc( "IF;" ) rrs(38) eoc(0) PrsSplit= asc("IF") dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(";") eoc(0) [ELECRAFT_K3R #Elecraft K2 revision 0.2 by Brendan Minish [email protected] P_LSB=1 P_USB=2 P_CW_USB=0 P_CW_LSB=0 P_AM=5 P_FM=4 P_FM_N=0 P_DATA_LSB=0 P_DATA_USB=0 P_DATA_FM=0 P_CW=7 P_FSK=6 P_RTTY=6 P_PACKET=9 P_CWR=3 LSB=1 USB=2 CW=7 FM=4 AM=5 FSK=6 RTTY=6 CWR=3 HIGH=3 MEDIUM=2 LOW=1 OFF=0 ON=1 FREQDIVIN=1 FREQDIVOUT=1 USEEXTENDEDMODES=0 FREQSHIFT=0 PACING=0 DefaultCW=7 DefaultAM=5 DefaultFSK=6 DefaultRTTY=6 DefaultFM=4 DefaultCWR=3 SelectVFOA= eoc(0) SetVFOA=asc( "FR0;" ) asc( "FA" ) dec( %vfoa,11 ) asc( ";" ) asc("MD") dec( %mode,1) asc ( ";" ) eoc(0) GetVFOA= asc("FA;") rrs(14) eoc(0) PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0) SelectVFOB= eoc(0) SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0) GetVFOB= asc("FB;") rrs(14) eoc(0) PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0) SetMode= eoc(0) GetMode= asc( "IF;" ) rrs(38) eoc(0) PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";") eoc(0) SetFilter= eoc(0) GetFilter= asc("K31;") asc( "FW;" ) eoc(0) PrsFilter= asc("FW") dec(%dummy,4) dec( %filter, 1 ) asc ( ";" ) eoc(0) SetSplit= asc( "FT" ) dec( %split ) asc ( ";" ) eoc(0) GetSplit= asc( "IF;" ) rrs(38) eoc(0) PrsSplit= asc("IF") dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(";") eoc(0)
______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
