Jack
Again thanks for your help -- I just wanted to let everyone know just
how good this program we are using really is..
What I should have done first instead of crying Wolf...
Go to the help screen..
Look under QSL Info Window using the Index...
There it explains how DxBase interfaces to QRZ through the internet and
it also explains how if for some reason that path is changed as QRZ did then
it will not work...
As it happens I am using 2006 which there was no fix for so --- it don't
work...
Thanks to all those that were scratching their heads on this one or
maybe thinking I was crazy... If you are using 2006 and I presume later and
you enter a QSL Manager for a particular call -- the manager's call will be
saved relative to the DX call but the managers address will not be saved
because ( in my case ) DxBase can not interface directly to QRZ.. Glad to
put this one to bed..
Jim [email protected]
----- Original Message -----
From: "Jack" <[email protected]>
To: "Jim Cowan" <[email protected]>; "Dxbase" <[email protected]>
Sent: Monday, October 26, 2009 3:35 PM
Subject: Re: [Dxbase] Got me beat
> Jim,
>
> You didn't mention what module you are using to add a manager address. I
> assume you are doing it directly from the QSL info window. The error msg
> means that the first line of the address you are trying to save/update is
> blank. Since there are two address boxes ( one for CD, the other for
> DXbase database) the one that you have selected is the one that is being
> validated. Perhaps you are entering an address in the DXbase box, but you
> have CDROM selected which is blank... Dunno.... but maybe this helps.
>
> Jack
>
> ----- Original Message -----
> From: "Jim Cowan" <[email protected]>
> To: "Dxbase" <[email protected]>
> Sent: Monday, October 26, 2009 2:59 PM
> Subject: [Dxbase] Got me beat
>
>
>> Well I tried most everything that I could think of
>>
>> running 2006 with Windows Xp --
>>
>> Entering a qsl manager - the message field 'mgr-adr1' can't
>> be zero-length strength.
>>
>> I have gone back over the manager information that I entered to make
>> sure that there was no incomplete entrys but I find nothing and am
>> thinking that I may be going down the wrong road on that one -- I don't
>> think you can enter an incomplete mgr address ..
>>
>> Anyone run into this - if so how do I get out of it --- entry does
>> seem to go into the database.. even with the message popping up in the
>> middle of the process..
>>
>> Jim [email protected]
>> ______________________________________________________________
>> Dxbase mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
>
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
