I seem to remember that DXB only remembers its location in relation to screen one in a multi-screen environment. The easiest thing to do is switch your cables in the back so the bottom screen is screen 1, then it should be okay. Sri about this type of work-around. Unless I hear diferently, I think my memory serves correct!
73 Neal Campbell Abroham Neal Software www.dxbase.com www.abrohamnealsoftware.com www.sdrsystems.com (540) 242 0911 Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to [email protected] Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ DX Cluster: dxc.k3nc.com port 23 On Mon, Nov 30, 2009 at 2:21 PM, Alan Leith <[email protected]> wrote: > I'm using DXB2006 in eager anticipation of 2010's release. However, since > changing the set-up of my screen configuration for logging, I have been > faced with a problem that has now become particularly bothersome. > > First, let me say that the problem did not exist before I changed. Then, I > had the logging screen on top and other windows open below it. And, I had > only one monitor. > > However, when I replaced my 15" "square" monitor with a 19" widescreen, I > moved the old monitor to the top of my rig so I could log without having to > turn my head. And because the monitor was somewhat higher than in the desk > position to the right of my radio, I moved the logging screen to the bottom > of the screen so I wouldn't have to strain my neck. > > So here's my problem. In the old configuration, I was able to save the > settings and the screen would return to those settings when I closed DXbase > or re-booted the computer. Not so any more. In the new screen > configuration on what is now monitor #2, every time the program is opened I > am required to re-adjust the size of three of the five windows that are > open. And it has become a real PITA in the last few days. > > Is there a way to "memorize" the settings on monitor #2? If there is, I'd > like to know. If there isn't, I'd like to know if the problem will be > fixed in the 2010 release. And will all the windows open on monitor #2 in > the new release or will I still have to turn my head to see open windows? > > 73 > > Al, VE1AL > > > > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
