I would like a way to decode both VFO's in my K3 at the same time on two separate screens so that I don't get confused.
I wonder if it is possible to run two AXETTY programs at once? The reason I ask this is once in a while I had a problem when running my K3 when operating split with the sub-receiver. What I found out is that I had AXETTY > MMTTY > Misc > Source > Mono. And with my sound card I had Record Control > Line-in > Balance centered. It turns out this was causing me to try to decode both VFO's at the same time. So, I have put the balance control to the left to decode VFOA. If I want to decode the sub-receiver I just slide the balance control to the right. First, can I run two versions of AXETTY at the same time and in the MMTTY setup select Left for one and Right for the other running program? If I install two separate versions of AXETTY in two different directories will this work? If this will work, then I am assuming I will need the sound card for one AXETTY and another sound card for the other AXTTY that is running? Is that correct or is there a way to do this with one sound card? Tnx for any feedback. N2TK, Tony ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
